Reviews
You must be logged in to post a review.
1.5" bore x 4" stroke cross tube hydraulic cylinder
$139.00
Pay in 4 interest-free payments of $34.75SKU: WCT 1.5x4
| Bore : | 1.5 in | Outer Dia. (⌀) : | 1.88 in | Stroke : | 4 in | Rod Dia. (⌀) : | 1 in | Port Size : | SAE 6 | Pin Dia. (⌀) : | 0.75 in | Extended : | 16 in | Retracted : | 12 in | Overall length : | 13.25 in | Pressure : | 3500 PSI | Column Load : | 5,300 LBs | Oil Volume : | 0.12 QTs | Brand : | Magister Hydraulics | Design : | Welded | Rod Type : | Chrome Plated | Rod End : | Cross Tube | Action : | Weight : | 7 LBs |
|---|---|
| GTIN : | 857743006277 |
In stock
39 in stock
Description
- 1.5″ bore x 4″ stroke cross tube hydraulic cylinder 3500 PSI. Heavy-duty hydraulics, 2-year warranty, free ground Continental US shipping. Magister cylinders manufactured using steel piston and steel threaded gland with wear rings for long life. Welded cross tube ends, honed cold-drawn tubing, hard chrome plated rod and top quality five component piston seals allow Magister Hydraulics cylinders to work in extreme conditions. Excellent replacement for front end loader.
- Applications:Â Welded Double Acting Hydraulic Cylinder.
- Color:Â Black.
NOTE! Chrome-plated rod is NOT induction hardened (Temperature treated). Possible bent rod is a result of a misuse(wrong measurements or type of application), such cases not covered under warranty!
Same-Day Shipping: all orders, made until 3 pm, will be shipped the same day (except weekends and holidays).
Free Ground Continental US Shipping
Tariff-FREE cylinders.
Made in Europe.
If you need assistance to choose a proper hydraulic cylinder replacement, do not hesitate to contact us:
973-344-5313
Can't find what you're looking for? We are here to point you in the right direction. CONTACT US CLICK HERE or CALL US 973-344-5313 Local Shops
mark a
Great place to work with
Mark Moon
Great product. I ordered the wrong size and seller approved my return request immediately. The new one (the correct size) showed up today and it looks like it’s going to be perfect
Sean Piers
Best service
Fran G.
I love it! Works as it should and perfect replacement for my old cylinder.
Autards
It is the best!!!!!
LastingTman
Always friendly
JLovette
I bought two to replace the cylinders on my John Deere tractor front push blade . John Deere wanted $269 each. I got these cylinders in 2 days at a fraction of the cost. So far I have ran them with no issues.
scaryd
Really nice cylinders. Saved me a LOT if money compared to what Kubota wanted for replacement cylinders for my BX2230 loader. Not a perfect match but an easy grind on one end and a couple of small hoses made at the local shop and as good as new.
I purchased the cylinder to use on the tilt of my Tractors front end loader. The install was simple and straight forward. Simply install a pin at each end’ add the hydraulic lines and off we go. The cylinder worked well for the first load or so. Then the problem came when the cylinder shaft bent. Mind you the old cylinder on the other side never bent. So I called to get a return number. Just to learn that a bent shaft was not covered under warranty. I emailed the customer service lady’s supervisor only to get an email that said no warranty. The cylinder was nistalled wrong. So buyer beware if you buy the cheap China stuff be ready to replace it as when it breaks it will not be under warranty.
carbeasle_11
prompt service product as described